Power Consumption and Sleep Modes of the DIMO AutoPiUpdated 6 months ago
The DIMO AutoPi has three operational modes:
Mode | Trigger | Power Consumption | Light Indicators | Operations |
Active | Vehicle Movement and voltage | ~ 104mA | During normal driving, you should see a solid blue light and a solid green light. The Blue LED will be solid when the device is fully powered Green indicates you have an LTE connection. | Queries PIDs (vehicle data) and non-CAN bus data (GPS, Battery Voltage etc.) and sends every 30 seconds |
Hibernation | 15 minutes after the vehicle is turned off OR voltage >=12.3V | ~14mA | The device will show a slow-breathing blue light. | The device will shut down and not query any PIDs. |
Critical shutdown | Voltage >=12.2V for 60 seconds | 0mA | No lights will be visible on the device. | Same as above |